Inspection Method

 Inspection method describes how to carry out the inspection process

Tcode to create - QS31

Here I want to measure the dimensions of a bottle. The steps to create inspection method are

• Go to QS31 enter the details as shown below
  
  
  
• Press enter after entering the details as shown above. Next the system will direct you to the screen shown below. The status should be release and enter Short Text and Search Field. Next to the short text, there is an option to create a long text. The steps to carry out bottle measurement can be entered here

  

  
  
• Enter the steps to carry out inspection

  

  
  
• There is a provision to even attach document containing steps

  

  
  
• Once all the details are entered save it
• The inspection method is assigned to MIC. To assign it to an existing MIC go to QS23 and to assign it to a new MIC go to QS21
• Assign inspection method as shown below

  

• Once it is saved, go to QP02 and enter the inspection method created as shown below
  
  
  
• Next when the inspection lot is created and when this MIC is used, then you can view inspection method while recording results